Subscribe to Our Youtube Channel
Related Manuals for Recsea RDH-SA6000
Summary of Contents for Recsea RDH-SA6000
- Page 1 SONY Alpha α6000 Waterproof Housing Recsea RDH-SA6000 MANUAL Please read this manual before use. NTF CORPORATION UH Division http://www.seatool.net...
-
Page 2: Features Of This Product
INTRODUCTION SONY Alpha α6000 Waterproof Housing RDH-SA6000 ※ Thank you for purchasing the RECSEA RDH-SA6000 Waterproof Housing. ※ To ensure proper and safe use, please thoroughly read this manual. ※ Improper use may cause leakage causing irreparable damage to your digital camera. -
Page 3: Package Contents
Mount (Fiber-Optic/SEA&SEA) and Screw ・O-ring Grease w/O-ring Removal Pick ・Wrist Strap GETTING TO KNOW YOUR RDH-SA6000 HOUSING ※ Pull Zoom / Focus Dial to free the Gear. ※To remove the Port Lens press Port Lock Button and turn Port to the counterclockwise until Port base is alined with housing port grooves. -
Page 4: Installing Camera
※ Please refer to camera manual for explanation of all camera functions. OPENING AND CLOSING THE BACK COVER ※ Please do the following operations in a clean area with low humidity and dust. Open & Close Dial Locks in two places, in the open position and in the closed position. 1. -
Page 5: Removing Camera
Failing to do so may result in leakage. ※ Please conduct the following operations in a clean area with low humidity and dust. ※ Recsea housings can be used with various Lens Ports and compatible with a variety of lenses. -
Page 6: Handling Precautions
Please be mindful of the weight of the light(s) you intend to use. For heavy lights and strobes please use Seatool/Recsea genuine tray and grip assembly and compatible connector. Please refrain from using lights attached to the Accessory Shoe as a carrying handle. -
Page 7: Maintenance
※ O-RING GREASING & MAINTENANCE ( 1) CAUTION! DO NOT use silicone grease other than that provided by Seatool/Recsea. CAUTION! This housing uses two (2) O-Rings, one (1) housing main body O-ring which comes in contact with the housing main body Contact Surface shown below, and one (1) Port O-ring. - Page 8 4. Visually and physically check each O-rings by running it through finger tips, feeling for cuts, cracks or any other defects that may cause leakage. Such defects will cause water leakage, if found be sure to replace the O-ring. Be careful not to stretch or pull the O-ring too much.
-
Page 9: Insurance Information
※ For replacement of consumable parts such as O-rings please contact your dealer or Seatool/Recsea. OPTIONS The following items are optional. Please contact Recsea or your local dealer if you wish to purchase. ・RECSEA Airlock Vacuum System RAV-S1 ・RDH-SNEX5 90mm Lens Port SLP-S90M-αE ・RDH-SNEX5 90mm Lens Port SLPF-S90M-αE (w/Port Focus Gear) -
Page 10: After-Sale Service
※ Warranty does not cover any losses resulting from inoperability of this product, including those related to lost profits or any related expenses. ※ Seatool/Recsea will stock parts necessary for repair for five (5) years from stop of production. ※ This product uses some degradable parts, such as buttons and O-Rings. Seatol/Recsea recommends overhauling the housing once per year, more frequently if used often. - Page 11 MEMO...
-
Page 12: Warranty Information
Serial Number ※Dealer: Stamp your company name and contact information, purchase date, model and serial number. Seatool/Recsea Manufacturing & Sales NTF CORPORATION UH Division 390-1 Mii, Midori-Ku, Sagamihara-Shi Kanagawa 252-0151, Japan T: +81 (0)50-7541-0294 F: +81 (0)42-780-5720 http://www.seatool.net E-mail: info@seatool.net...
Need help?
Do you have a question about the RDH-SA6000 and is the answer not in the manual?
Questions and answers