Page 1
CANON PowerShot G7 X Waterproof Housing Recsea CWC-G7X MANUAL Please read this manual before use. NTF CORPORATION UH Division http://www.seatool.net...
Page 2
INTRODUCTION CANON PowerShot G7 X Waterproof Housing CWC-G7X ※ Thank you for purchasing the RECSEA CWC-G7X Waterproof Housing. ※ To ensure proper and safe use, please thoroughly read this manual. ※ Improper use may cause leakage causing irreparable damage to your digital camera.
PACKAGE CONTENTS Be sure all items listed here are included: ・CWC-G7X Housing ・Strobe Mask-External Strobe Connection ・Diffuser Mount (Fiber-Optic/SEA&SEA) and Screw ・Wrist Strap ・Reserve O-ring Set ・O-ring Removal Pick ・O-ring Grease GETTING TO KNOW YOUR CWC-G7X HOUSING...
Dealer Name Serial Number ※Dealer: Stamp your company name and contact information, purchase date, model and serial number. Recsea/Seatool Manufacturing & Sales NTF CORPORATION UH Division 390-1 Mii, Midori-Ku, Sagamihara-Shi Kanagawa 252-0151, Japan T: +81 (0)50-7541-0294 F: +81 (0)42-780-5720...
Page 5
※ Please refer to camera manual for explanation of camera controls. ※ Attach Diffuser and shown above using the grooves provided on the Lens Port. OPENING AND CLOSING THE BACK COVER ※ Please do the following operations in a clean area with low humidity and dust. Open &...
4. To close, place the Back Cover Lip-hinge into the Lip-hinge Groove on the main body, seat Back Cover into place and press firmly (Note: Dial will turn to the left (counterclockwise). While pressing the Open & Close Lock Button, Using the Open & Close Dial Lever turn the dial completely to the left making sure the Open &...
Page 7
※Two (2) Tripod Sockets are provided at the bottom of the housing for use in attaching Seatool/Recsea genuine tray and grip assemblies. CAUTION! Seatool/Recsea STRONGLY recommends the use of Seatool/Recsea genuine tray and grip assemblies listed below under OPTIONS. Leakage or damages due to the use of non-genuine options are NOT covered under warranty.
※ O-RING GREASING & MAINTENANCE ( 1) CAUTION! DO NOT use silicone grease other than that provided by Seatool/Recsea. 1. Using the O-ring Removal Pick, remove O-rings. 2. Clean sand, salt, other contaminants and old grease from O-rings. 3. Clean O-ring grooves and O-ring Contact Surfaces using a clean cotton swab.
Diffuser, Strobe Mask-External Strobe Connection Mount (Fiber-Optic/SEA&SEA) and Screw, Wrist Strap, Reserve O-ring Set, O-ring Removal Pick, O-ring Grease OPTIONS The following items are optional. Please contact Seatool/Recsea or your local dealer if you wish to purchase. ・M67-ST Adapter ST-NV-M67 ・M67-28LD Adapter AD-M67/28LD ・Close-Up 50mm Lens SAL-01-M67 and SAL-01-M52...
※ Warranty does not cover any losses resulting from any malfunction of this product, including those related to lost profits or any related expenses. ※ Seatool/Recsea will stock parts necessary for repair for five (5) years from stop of production.
Need help?
Do you have a question about the CWC-G7X and is the answer not in the manual?
Questions and answers