Mini COOPER CLUBMAN Owner's Manual page 67

Distance
Adjust the distance so that the head restraint is
as close as possible to the back of the head.
Adjust the head restraint via the backrest tilt as
needed.
Safety information
WARNING
A missing protective effect due to re‐
moved or not correctly adjusted head restraints
can cause injuries in the head and neck area.
There is a risk of injury. Before driving, install
the head restraints on the occupied seats. En‐
sure that the middle of the head restraint sup‐
ports the back of the head approximately at
eye level.◀
WARNING
Body parts can be jammed when moving
the head restraint. There is a risk of injury.
Make sure that the area of movement is clear
when moving the head
WARNING
Objects on the head restraint reduce the
protective effect in the head and neck area.
There is a risk of injury.
▷ Do not use seat or head restraint covers.
▷ Do not hang objects, e.g., clothes hangers,
directly on the head restraint.
▷ Only use accessories that have been deter‐
mined to be safe for attachment to a head
restraint.
▷ Do not use any accessories, e.g., pillows,
while driving.◀
Adjusting the height: John Cooper
Works sport seat
The height of the head restraints cannot be ad‐
justed.
restraint.◀
Online Edition for Part no. 01 40 2 976 545 - X/16
Settings
To adjust the height: basic seat
▷ To lower: press the button, arrow 1, and
push the head restraint down.
▷ To raise: push the head restraint up.
Removing: John Cooper Works sport
seat
The head restraints cannot be removed.
To remove: basic seat
Only remove the head restraint if no one will be
sitting in the seat in question.
1. Fold the seat backrest forward if needed.
2. Pull head restraint up as far as possible.
3. Press the button, arrow 1, and pull the
head restraint out completely.
CONTROLS
67