Mini COOPER CLUBMAN Owner's Manual page 141

Display in the instrument cluster lights
up. The current speed is adopted as de‐
sired speed and displayed with symbol.
Cruise control is active and maintains the set
speed.
DSC will be switched on if needed.
Switching off
With the Stop&Go function for Steptronic trans‐
missions: when switching off while stationary,
depress the brake pedal simultaneously.
Press button on the steering wheel.
The displays go out. The stored desired speed is
deleted.
Interrupting manually
Press button on the steering wheel.
With the Stop&Go function for Step‐
tronic transmissions: when interrupting while
stationary, depress the brake pedal simultane‐
ously.
Interrupting automatically
The system is automatically interrupted in the
following situations:
▷ When the driver applies the brakes.
▷ Manual transmission: when the clutch
pedal is depressed for a few seconds or re‐
leased while a gear is not engaged.
▷ If selector lever position N is set.
▷ When DTC is activated or DSC is deacti‐
vated.
▷ When DSC is actively controlling stability.
▷ If the detection range of the camera is im‐
paired, for instance by soiling, heavy pre‐
cipitation or glare effects from the sun.
▷ Manual transmission: if the vehicle in front
decelerates below a speed of approx.
20 mph/30 km/h.
Online Edition for Part no. 01 40 2 976 545 - X/16
Driving comfort
▷ With the Stop&Go function for Steptronic
transmissions: following a longer stationary
period after the vehicle was braked to a
stop by the system.
Setting the speed
Maintaining/storing the speed
Press or
When the system is switched on, the current
speed is maintained and stored as the desired
speed.
The stored speed is displayed on the
symbol.
DSC will be switched on, if needed.
The speed can also be stored as follows:
Press button.
Changing the speed
or button: press until the desired speed
is set.
If active, the displayed speed is stored and the
vehicle reaches the stored speed when the
road is clear.
▷ or button: each time it is pressed to
the point of resistance, the desired speed
increases or decreases by approx.
1 mph/1 km/h.
▷ or button: each time it is pressed
past the point of resistance, the desired
speed increases or decreases by a maxi‐
mum of 5 mph/10 km/h.
or button: hold down to repeat the ac‐
tion.
CONTROLS
button in the interrupted state.
141