Mini COOPER CLUBMAN Owner's Manual page 106

CONTROLS
4. "Consumption" or "Speed"
5. "OK"
Resetting the trip computer
Via the onboard monitor:
1. "My MINI"
2. "Driving information"
3. "Trip computer"
4. Move the controller to the left, if needed.
▷ "Reset": all values are reset.
▷ "Automatic reset": all values are
reset approx. 4 hours after the vehicle
has come to a standstill.
Driving Excitement
Concept
On the Control Display, sport instruments can
be displayed, and the vehicle state can be
checked before the use of the SPORT program.
Sport instruments
On the Control Display, values for power and
torque are displayed.
Displaying sport instruments
Via the onboard monitor:
1. "My MINI"
2. "Technology in action"
3. "Sport displays"
4. "Sports instruments"
Via MINI Driving Modes switch:
1. Activate SPORT.
2. "Sport displays"
3. "Sports instruments"
106
Displays
Online Edition for Part no. 01 40 2 976 545 - X/16
Vehicle state
The following vehicle and surrounding area
data is automatically checked and evaluated in
succession:
▷ Range.
▷ Engine temperature.
▷ External temperature.
▷ SPORT program state.
Finally, a total evaluation of the vehicle state is
displayed.
Checking vehicle state
Via the onboard monitor:
1. "My MINI"
2. "Technology in action"
3. "Sport displays"
4. "Vehicle and surroundings"
Via the MINI Driving Modes switch:
1. Activate SPORT.
2. "Sport displays"
3. "Vehicle and surroundings"
Speed warning
Concept
A speed limit can be set that when reached will
cause a warning to be issued.
General information
The warning is repeated if the vehicle speed
drops below the set speed limit once by at least
3 mph/5 km/h.
Displaying, setting or changing the
speed warning
Via the onboard monitor:
1. "My MINI"
2. "Vehicle settings"