Daytime Running Lights; Cornering Light - Mini COOPER CLUBMAN Owner's Manual

Hide thumbs Also See for COOPER CLUBMAN:
Table of Contents

Advertisement

CONTROLS
The indicator light in the instrument cluster is il‐
luminated when the low beams are switched
on.
System limits
The automatic headlight control cannot serve
as a substitute for your personal judgment of
lighting conditions.
For example, the sensors are unable to detect
fog or hazy weather. To avoid safety risks under
these conditions, you should always switch on
the lights manually.

Daytime running lights

General information
Position of switch:
The daytime running lights light up when the
ignition is switched on. After the ignition is
switched off, the parking lights light up in posi‐
tion
.
Activating/deactivating
In some countries, daytime running lights are
mandatory, so it may not be possible to deacti‐
vate the daytime running lights.
Via the onboard monitor:
1.
"My MINI"
2.
"Vehicle settings"
3.
"Lighting"
4.
"Exterior lighting"
5.
Select the desired setting.
Settings are stored for the remote control cur‐
rently used.

Cornering light

General information
Position of switch:
114
Lights
,
,
Online Edition for Part no. 01 40 2 976 545 - X/16
When going around corners, the cornering light
also lights the interior area of the curve. Below
a speed of approx. 25 mph/40 km/h when the
turn signal is switched on and the steering an‐
gle is detected, there is automatic activation.
Malfunction
A Check Control message is displayed.
Cornering light is malfunctioning or has failed.
Have the system immediately checked by a
dealer's service center or another qualified
service center or repair shop.
Self-leveling headlights
The self-leveling headlights compensate for ac‐
celeration and braking operations in order not
to blind the oncoming traffic and to achieve
optimum illumination of the roadway.
High-beam Assistant
Concept
The high-beam Assistant detects other traffic
participants early on and automatically
switches the high beams on or off depending
on the traffic situation. The assistant ensures
that the high beams are switched on, whenever
the traffic situation allows. In the low speed
range, the high beams are not switched on by
the system.
General information
The system responds to light from oncoming
traffic and traffic driving ahead of you, and to
adequate illumination, for instance in towns
and cities.
The high beams can be switched on and off at
any time as usual.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents