Mini COOPER CLUBMAN Owner's Manual page 142

CONTROLS
Adjusting distance
Safety information
WARNING
The system does not release from the
personal responsibility. Due to the system lim‐
its, braking can be late. There is a risk of acci‐
dents or risk of property damage. Be aware to
the traffic situation at all times. Adjust the dis‐
tance to the traffic and weather conditions and
maintain the prescribed safety distance, possi‐
bly by braking.◀
Reduce distance
Press button repeatedly until the de‐
sired distance is set.
The set distance is briefly displayed in
the left part of the instrument cluster.
Increase distance
Press button repeatedly until the de‐
sired distance is set.
The set distance is briefly displayed in
the left part of the instrument cluster.
Continuing cruise control
General information
An interrupted cruise control can be continued
by calling up the stored speed.
Make sure that the difference between current
speed and stored speed is not too large before
calling up the stored speed. Otherwise, unin‐
tentional braking or accelerating may occur.
In the following cases, the stored speed value is
deleted and cannot be called up again:
▷ When the system is switched off.
▷ When the ignition is switched off.
142
Driving comfort
Online Edition for Part no. 01 40 2 976 545 - X/16
Calling up stored speed and distance
Press button with the system inter‐
rupted. Cruise control is continued with
the saved values. The selected distance is
briefly displayed in the CID (central information
display).
Switching distance control on/off
Safety information
WARNING
The system does not react to traffic driv‐
ing ahead of you, but instead maintains the
stored speed. There is a risk of accidents or risk
of property damage. Adjust the desired speed
to the traffic conditions and brake as
Switching distance control off
Press and hold this button.
Or:
Press and hold this button.
The indicator lamp in the instrument
cluster lights up.
To switch distance control back on, press one of
the two buttons again briefly.
After changing over distance control, a Check
Control message is displayed.
Displays in the instrument cluster
Desired speed and stored speed
In addition to the indicator lamp, the
desired speed is displayed in the central
information display.
▷ Display lights up green: system is active, the
display indicates the desired speed.
needed.◀