Mini COOPER CLUBMAN Owner's Manual page 238

MOBILITY
▷ Arrow 2: tail light.
6. Proceed in the reverse order to insert the
new bulb and attach the bulb holder. Make
sure that the bulb holder engages in all fas‐
teners.
Rear fog lights/reversing lights/tail lights
Bulbs: P21W/W5W
1. Open the split doors.
2. Remove left or right cover.
3. Press the latches together in the direction
of the arrow, arrow 1, and remove the bulb
holder.
Loosen the plug connector, arrow 2, on the
bulb holder.
238
Replacing components
Online Edition for Part no. 01 40 2 976 545 - X/16
4. Remove the bulb holder from the opening.
5. Press the nonworking bulb gently into the
socket, turn counterclockwise and remove.
▷ Arrow 1: tail light.
▷ Arrow 2: rear fog lights.
▷ Arrow 3: reversing light.
6. Proceed in the reverse order to insert the
new bulb and attach the bulb holder. Make
sure that the bulb holder engages in all fas‐
teners.
Tail lamps in bumpers
Follow the general instructions on lights and
bulbs, refer to page 232.
Brake lights/turn signals
Bulbs: P21W
1. Press out cover below the tail lamp.
2. Remove the screwdriver from the onboard
vehicle tool kit.