Mini COOPER CLUBMAN Owner's Manual page 239

3. Pull the screwdriver blade from the handle
and place it on the recessed-head screw
head in the bumper.
4. Attach the screw driver handle with the slot
to the blade, arrow 1.
5. Loosen screw in the bumper, arrow 2.
6. Pull tail lamp from the bumper.
Replacing components
Online Edition for Part no. 01 40 2 976 545 - X/16
7. Turn the bulb holder counter-clockwise and
remove nonworking bulb.
8. To insert the new bulb and install the tail
lamp, proceed in reverse order of removal.
Make sure that the bulb holder sits tight in
the tail lamp.
Central brake lamp and license plate
lamp
Follow the general instructions on lights and
bulbs, refer to page 232.
The lights feature LED technology. In the case
of a malfunction, contact a dealer's service cen‐
ter or another qualified service center or repair
shop.
Side turn signal, bulb replacement
Follow the general instructions on lights and
bulbs, refer to page 232.
Bulbs:
MOBILITY
239