Connection Test - Epson S5U1C17001H User Manual

Cmos 16-bit single chip microcomputer

Hide thumbs Also See for S5U1C17001H:

Table of Contents

5.4 Connection Test

The S5U1C17001H has a connection test feature to diagnose if it can communicate with the target system properly

when the debugger (gdb.exe) starts up. Perform the connection test, for example, when the S5U1C17001H does not

start up by the correct procedure. Use the DIP switch to select whether the connection test will be omitted or ex-

ecuted.

Omitting the connection test (default)

When SW6 is set to OPEN, the S5U1C17001H will omit the connection test at the start up of the debugger (gdb.

exe).

executing the connection test

When SW6 is set to ON, the S5U1C17001H will execute the connection test at the start up of the debugger (gdb.

exe).

S5U1C17001H USer ManUal

(ICD MInI Ver. 1.0)

Downloaded from

Elcodis.com

electronic components distributor

ePSOn

5 ICD MODe

Table of Contents