Epson S5U1C17001H User Manual page 27

reset request
Do not reset the target system while the target program execution is suspended as the S5U1C17001H will be
unable to operate normally.
notes on target system power supply
The allowable voltage range for the signals input from the target system is 0 to 5.5 V. The S5U1C17001H may
fail if voltages that exceed this range are input. Therefore, target systems to be connected to the S5U1C17001H
must be designed so that voltages outside this range are not applied. Take special care in designing the target
system power supply, and design the target system so that overvoltages are not applied to the S5U1C17001H
when the target system power supply is turned on or off.
S5U1C17001H USer ManUal
(ICD MInI Ver. 1.0)
Downloaded from Elcodis.com electronic components distributor
ePSOn
8 PreCaUTIOnS
21