1 OVerVIeW
1.1 Features
• S1C cores supported
• Host interface
• Data download rate
• Debugger mode
• Program break functions
• Measurement of program execution time
• Standalone Flash programmer function
• Firmware update function
• DCLK frequency to communicate with the target
• Flash programming power voltage supply
• Target reset signal output
• Target system I/O interface voltage
• Target system interface connector
• Flash programming power supply connector
*1 Scheduled to be supported with a firmware update
*2 The frequency assumes that the I/O voltage is 3.3 V. The maximum frequency may be lower than the spec value
due to ambient noise, temperature condition, product type, and unevenness in quality.
1.2 Operating environment
As the host computer, the S5U1C17001H uses a PC with a USB port (USB 1.1) available. Windows 2000 or Win-
dows XP is recommended for the OS.
2
Downloaded from
Elcodis.com
electronic components distributor
S1C17 Core
*1
S1C33 STD Core
*1
S1C33 mini Core
*1
S1C33 PE Core
*1
S1C33 ADV Core
USB 1.1
Approx. 65KB/s when DCLK = 40 MHz (Max.)
Approx. 50KB/s when DCLK = 20 MHz
ICD Mini mode
PC break function
Lapse of time break function
Forced break function
External forced break function (BRK IN pin input)
Can be measured from within 3 µs to 6515 hours
Available
Available
4 kHz to 40 MHz
Available
Available
3.3 V, 1.8 V, or voltage (1.0 to 5.0 V) input from the target
4-pin connector
4-pin connector
ePSOn
*2
*2
S5U1C17001H USer ManUal
(ICD MInI Ver. 1.0)