Adjusting The Stability And The Maneuverability; Maintenance - Vermeiren V300 Instruction Manual

Adjust the height and the depth of the armpad as follow:
1. Remove both screws under the armpad.
2. Place the correct number of blocks under and above the tubes, see table 5.
3. Install the armpad with the required holes for depth adjustment.
3.8

Adjusting the stability and the maneuverability

The stability and maneuverability can be adjusted by moving the axle plate of the rear
wheels .
4

Maintenance

For the maintenance manual of the wheelchairs refer to the Vermeiren website:
www.vermeiren.com.
Adjust the stability and maneuverability according
following steps:
1. Loosen the bolts of axle plate.
2. Move the axle plate  in the desired position.
3. Retighten the bolts.
Page 22
V300, V300D
2016-06