OWC Superslim Assembly Manual & User Manual page 4

4. Put the top case back on the bottom case and push toward the left, as shown. This
will seat the top case into the tabs mentioned in Step 1 and secure the enclosure.
5. Flip the enclosure over and use a Phillips screwdriver to insert the fully threaded
screw through the screw hole circled in the picture at right. When the screw is
installed, remove the adhesive backing from the rubber foot and place the rubber
foot on top of the screw.
The assembly process is now complete. For information on how to connect your
OWC SuperSlim enclosure, please see the support tips provided on the next page.
OWC SuperSlim
3