Connecting With An External Device; Connecting To An Image Output Device - Casio XJ-UT331X User Manual

Connecting with an External Device

Before starting projection, you first need to connect a computer, video device, and/or other external
devices to the projector.
 For information about locations of the terminals that correspond to the numbers in the "Projector
Terminal" column of the table, see "Terminals" (page 18).
 When a cable is not provided with the projector for a connection, use a commercially available
cable. When selecting a cable, make sure that the shapes of its connectors match the shapes of the
projector and other equipment terminals.

Connecting to an Image Output Device

You can have multiple image output devices connected to the projector at the same time. Use the
projector's [INPUT] key to select the device whose image you want to project.
Other Device / Terminal Type
Computer / RGB Out Terminal
Video Device / Component Video Out Terminal
Video Device / S-Video Out Terminal
Video Device / Composite Video Out Terminal
Computer or Video Device / HDMI Out Terminal
USB flash drive or other external USB storage
1
device*
Graphing Calculator / USB Port*
YW-40 Wireless Adapter (available separately or
included)* 4
*1 Network models only. For information about operation following connection, see "Projecting from
USB Input (Network Models Only)" (page 39).
*2 See "Connecting USB Memory Devices to the Projector" (page 40).
*3 Network models only. For information about operation following connection, see "Projecting the
Screen Image of a Graphing Calculator" (page 45).
*4 Network models only. For information about operation following connection, see the separate
"Network Function Guide".
Projector
Terminal



3
20
Projector Terminal Shape

, 15-pin Mini D-Sub female

, 15-pin Mini D-Sub female

4-pin Mini Din female

RCA pin jack

, HDMI Type A female

USB Type A female

USB Type A female

USB Type A female
Cable
RGB
Component video
S-terminal
Pin plug
High Speed HDMI
*
2
USB
–