Appendix; Connecting To A Component Video Output Device - Casio XJ-S43W User Manual

Connecting to a Component Video Output Device

Some video devices are equipped with a component video output terminal. You can use an
optionally available component video cable (YK-3) to connect the COMPUTER terminal of the
projector to the component video output terminal of a video device.
Important!
Always turn off the projector and the video device before connecting them.
Projector
AV terminal
You can use the optional YK-3 component video cable to connect to pin jack (RCA) type
component video output terminals. The projector does not support connection to any other
type of terminal.
Component video output terminals come in 3-terminal sets: Y·Cb·Cr or Y·Pb·Pr. Be sure to
match the colors of the plugs on the optional YK-3 component video cable with the colors
of the terminals (Green: Y; Blue: Cb/Pb; Red: Cr/Pr).
Note that connection only to an analog component video output terminal is supported.
Connection to a digital output terminal is not supported.
Downloaded From projector-manual.com Casio Manuals

Appendix

COMPUTER terminal
Optional component
video cable (YK-3)
Bundled special AV cable
To component video output
terminal
To AUDIO output terminal
White
Red
Yellow
(Not connected)
45
Video device