Casio XJ-UT331X User Manual page 7

 Power cord
+
Misuse of the power cord creates the
risk of fire and electric shock.
Make sure that you always observe the
following precautions.
• Be sure to use only the accessories that come
with the projector.
• Make sure that you use a power source with
the same voltage as that specified for the
projector.
• Do not overload a power outlet with too many
devices.
• Do not locate the power cord near a stove.
• Do not use the power cord that comes with
the projector with any other device.
• Do not share the outlet supplying power to the
projector with other devices. If you are using
an extension cord, make sure that the ampere
rating of the extension cord is compatible with
the power consumption value of this projector.
• Never use the power cord while it is still
bundled together.
• Use a conveniently located power outlet that
you can reach easily when you need to unplug
the projector.
-
A damaged power cord creates the risk
of fire and electric shock.
Make sure that you always observe the
following precautions.
• Never place heavy objects on the power cord
and never expose it to heat.
• Make sure the power cord is not pinched
between the wall and the rack or table where
the projector is located, and never cover the
power cord with a cushion or other object.
• Never try to modify the power cord, allow it to
become damaged, or subject it to excessive
bending.
• Do not twist the power cord or pull on it.
"
Never touch the power cord or plug
while your hands are wet.
Doing so creates the risk of electric
shock.
• When using this projector in the country where
you purchased it, be sure to use the power
cord that came with it. Whenever using the
projector in another country, be sure to
purchase and use a power cord that is rated
for the voltage of that country. Also make sure
that you are aware of the Safety Standards
that apply in that country.
-
When going out, make sure the
projector is in a location away from pets
and other animals, and unplug the
power plug from the power outlet. A
power cord damaged by chewing can
cause shorts, and creates the risk of
fire.
 Water and foreign matter
+
Never allow water to get on the
projector. Water creates the risk of fire
and electric shock.
%
Never place a vase or any other
container of water on top of the
projector. Water creates the risk of fire
and electric shock.
%
Water or other liquid, or foreign matter
(metal, etc.) getting into the projector
creates the risk of fire and electric
shock. Should anything get inside the
projector, immediately perform the
following steps.
1. Turn off the projector.
2. Unplug the projector.
3. Contact your original dealer or authorized
CASIO service center.
 Disassembly and modification
!
Never try to take the projector apart or
modify it in any way. The projector
contains a large number of high-voltage
components that create the risk of
electric shock and burn injury. Also,
note that problems caused by
unauthorized projector disassembly or
modification are not covered by the
warranty and are not eligible for repair
by CASIO.
Be sure to leave all internal inspection,
adjustment, and repair up to your original dealer
or authorized CASIO service center.
7