Projector Cabinet - Casio XJ-UT331X User Manual

 Dropping and impact
-
Continued use of the projector after it
has been damaged by dropping or
other mistreatment creates the risk of
fire and electric shock. Immediately
perform the following steps.
1. Turn off the projector.
2. Unplug the projector.
3. Contact your original dealer or authorized
CASIO service center.
 Disposal by burning
-
Never try to dispose of the projector by
burning it. Doing so can cause an
explosion, which creates the risk of fire
and personal injury.
 Projector light emission
-
• Never look directly into the lens,
intake vents, or exhaust vents while
the light is on. When turning on the
projector, check to make sure that no
one is looking directly into its lens,
intake vents, or exhaust vents. The
strong light emitted by the projector
creates the risk of eye damage.
• Do not attempt to use a magnifying
glass, mirror, or other similar object
to bend or reflect the projector's light,
and never hold or place such object
in the path of the projector's light.
Refracted or reflected light can shine
into a person's eyes and create the
risk of eye damage.
 Blocking the vents
-
Never allow the vents to become
blocked. Doing so causes internal heat
build up, which creates the risk of fire
and breakdown of the projector.
Touching the projector while it is hot
creates the risk of burn injury. Make
sure that you always observe the
following precautions.
• Maintain a distance of at least 6 cm (2.4
inches) between the front of the projector
(from which light is being emitted) and the
projection surface (screen). Maintain a
distance of at least 30 cm (11.8 inches)
between surfaces and the other sides of the
projector.
• Do not insert the projector into any space
where air circulation is poor.
• Never cover the projector with a blanket or any
similar item.
• Locate the projector on a firm, flat surface
during use. Never use the projector while it is
on a carpet, blanket, towel, seat cushion, or
other pliable surface.
• Never stand the projector up on either end
during use.
 Projector cabinet
'
Never open the projector's cabinet.
Doing so creates the risk of electric
shock.
 Cleaning
$
Before cleaning the projector, be sure to
turn it off and unplug it from the power
outlet. Failure to do so creates the risk
of electric shock.
 Exhaust vents
The exhaust vents become very hot while the
projector is running. Never touch them. Doing so
creates the risk of burn injury. The areas near the
exhaust vents also become quite hot. Never
locate objects made of plastic or other
heat-sensitive materials near or under the
projector. Doing so creates the risk of
deformation and discoloration of the object.
 Location
Never locate the projector in any of the following
types of locations. Doing so creates the risk of
fire and electric shock.
• Near an area subject to strong vibration
• An area subject to large amounts of moisture
or dust
• In a kitchen or other area exposed to oil
smoke
• Near a heater, on a heated carpet, or in an
area exposed to direct sunlight
• An area subject to temperature extremes
(Operating temperature range is 5°C to 35°C
(41°F to 95°F)).
8