Casio XJ-UT331X User Manual page 37

Use this menu item:
Multimedia Settings 3
Autorun
Multimedia Settings 3
Functions (F)
Network Settings 3
Wired LAN info
Network Settings 3
Wireless LAN Info
Network Settings 3
Projector Wired LAN
Settings
Network Settings 3
Projector Wireless LAN
Settings
Network Settings 3
Remote On
Network Settings 3
PJLink Authentication
Network Settings 3
Update Network Settings
Network Settings 3
Initialize Network Settings
Operational Info
Restore All Defaults 3
Unit Operating Time
Restore All Defaults 3
Restore All Defaults
To do this:
Specify whether to use (Enable*) or not use (Disable) the autorun function. For
details, see "Autorun" (page 43).
Display the same menu (Function Menu) that appears when the remote controller's
[FUNC] key is pressed.
Shows information about the current wired LAN connection status (IP address,
DHCP setting, etc.)
Shows information about the current wireless LAN connection (IP address, DHCP
setting, security settings, status of connection with external access point, etc.)
Configure the IP address setting.
Displays a dialog box for selecting the SSID and setting the IP address for use when
the projector is used as a wireless LAN access point.
Specify whether the projector can be turned on via wired LAN while the projector is
in standby (projector off with power being supplied).
Enable: Remote on enabled.
Disable*: Remote on disabled.
Projector standby power consumption depends on whether or not "Remote On" is
enabled. For information about power consumption in each standby state, see
"Specifications" (page 60).
Enables and disables PJLink connection authentication. Initial default setting:
Enable.
Reflects on the projector changes made to "Projector Wireless LAN Settings".
Returns network settings to their initial factory defaults.
Display the projector information below.
Input Signal, Signal Name, Resolution, Horizontal Frequency, Vertical Frequency,
Scan System, Audio Input, Projector ID, Light Time, Version (projector ROM version)
Display the cumulative operating time of this unit.
This time cannot be initialized.
Initialize all Setup Menu item settings, except for those below.
Option Settings 1 3 Language, Option Settings 1 3 Power On Password,
Operational Info 3 Light Time, Operational Info 3 Version,
Restore All Defaults 3 Unit Operating Time
Note
 A user logo image that has been transferred to the projector (page 52) is not
deleted by a "Restore All Defaults" operation.
37