Advanced: Apm - Aaeon AEC-6643 User Manual

Serial Port 4
Enable or Disable Serial Port

3.4.9 Advanced: APM

Options summary:
Restore AC Power Loss
Specify what state to go when power is re-applied after a power failure (G3 state).
Power On By PCIE
Power On By PCIE
Power On By Ring
Power On By Ring Note: This item function only if there is a serial port (COM1)
connector on a motherboard.
Power On By RTC
Power On By RTC
Chapter 3 – AMI BIOS Setup
Enabled Optimal Default, Failsafe Default
Disabled
Power Off Optimal Default, Failsafe Default
Power On
Last State
Disabled Optimal Default, Failsafe Default
Enabled
Disabled Optimal Default, Failsafe Default
Enabled
Disabled Optimal Default, Failsafe Default
Enabled
30