Limited Warranty - COOK GI Installation, Operation And Maintenance Manual

Parts List
Part No. Description
1 Hood Panel
2 End Panel
3 Section Rail
4 Mounting Bracket - Left
5 Mounting Bracket - Right
6 Mounting Rail
7 Base / Throat
8 Self-Tapping Screw
9 Wizzbolt
10 Wizznut
A Self Tapping Screw
B Flat Washer
C Birdscreen
10
Standard Assembly

Limited Warranty

Loren Cook Company warrants that your Loren Cook fan was manufactured free of defects in materials and workmanship, to the extent stated herein.
For a period of five (5) years after date of shipment, we will replace any parts found to be defective without charge, except for shipping costs which will be
paid by you. This warranty is granted only to the original purchaser placing the fan in service. This warranty is void if the fan or any part thereof has been
altered or modified from its original design or has been abused, misused, damaged or is in worn condition or if the fan has been used other than for the
uses described in the company manual. This warranty does not cover defects resulting from normal wear and tear. To make a warranty claim, notify Loren
Cook Company, General Offices, 2015 East Dale Street, Springfield, Missouri 65803-4637, explaining in writing, in detail, your complaint and referring
to the specific model and serial numbers of your fan. Upon receipt by Loren Cook Company of your written complaint, you will be notified, within thirty
(30) days of our receipt of your complaint, in writing, as to the manner in which your claim will be handled. If you are entitled to warranty relief, a warranty
adjustment will be completed within sixty (60) business days of the receipt of your written complaint by Loren Cook Company. This warranty gives only
the original purchaser placing the fan in service specifically the right. You may have other legal rights which vary from state to state.
GI/GR IO&M
See Figure 1,
page 2
3
9
4
10
9
5
10
Corporate Offices: 2015 E. Dale St. Springfield, MO 65803
Phone 417-869-6474 | Fax 417-862-3820 | lorencook.com
Figure 5
1
For replacement hood sections (not individual hood panels)
please indicate which open end extrusion is required: (A) the
top extrusion or (B) the bottom extrusion. For replacement
middle hood sections the extrusion designation is not required.
7
4
8
2
6
9
8
March 2017
B51116-002