Advanced Operation - IKONNIK ET4DS Owner's Manual & Technical Information

Advanced Operation

The ET4Ds offers a range of programming options that can be activated and
adjusted using the LCD / Roller Button interface – 15) 16) (17.
Transmitter programming is carried out using the Roller Button (5) and the
Back Button (6).
1. From the home screen press the Roller Button (5) once to access the
programming list. The letters MOD will appear on the screen indicating
that you are in the Model memory menu.
2. Rotating the Roller Button forwards, one stop at a time, will display the
various programming options which will appear in the following order:
• MOD (Model Memory)
• TRM (Trim adjustment)
• D/R (Rate adjustment)
• EPA (End Point Adjustment)
• EXP (Exponential)
• REV (Servo reverse)
• ABS (ABS braking)
• MIX (Rock crawler steering mix / modes)
• EPA-TY
• F/S (Fail-safe)
• RST (Reset)
3. To select a particular programming option and make adjustments press
the Roller Button once more.
4. Having selected the option you wish to adjust use the roller button to
select (press) and adjust (roll) to suit your requirements.
By way of example, here's how you would reverse the direction of the Channel
3 servo.
1. Turn ON the transmitter.
2. Press the Roller Button (5) once to access the programming list. The
letters MOD will appear on the screen.
3. Use the Roller Button to scroll forward through the programming options
until you reach REV.
4. Press the Roller Button once more to enter the REV menu. ST (steering)
will be displayed indicating that this is where you can reverse the steering
servo.
5. Use the Roller Button to scroll forward to TH (throttle) and finally 3CH
(Channel 3).
6. Press the Roller Button to display the current servo condition – NOR-3C
indicates a normal servo direction whilst REV-3C indicates a reversed
servo direction.
7. Use the Roller to choose the option you require.
8. Return to the home screen by pressing the Back Button three times.
A programming flow chart is included here to enable you to easily navigate
the menu options and make the adjustments you need:
14