Set Weather Scan; Set Weather Alert Mode - Uniden CMX760 Owner's Manual

Set Weather Scan

Weather Scan mode allows the radio to move to
the next weather channel if no signal is detected.
1. Press WX/ALERT to enter Weather mode. The
WX
icon displays and the radio tunes to the
last weather channel.
2. Press SCAN to scan weather channels.
3. Press SCAN again to stop scanning weather
channels.
4. Press WX/ALERT to exit Weather mode.
If Weather Scan is ON when you turn off the
radio, Weather Scan remains ON.
Left at these setting (WX, WX Scan), you will
hear only weather broadcasts and Weather Alert
signals. To use your CB radio normally while
monitoring weather alerts, exit WX or WX Scan
modes.

Set Weather Alert Mode

Weather Alert mode only operates when you are
in CB mode; it does not operate in Weather mode.
In CB mode, the radio sounds an alert tone when it
detects a 1050Hz tone on a weather channel.
1. Press and hold WX/ALERT to turn Weather
Alert on.
2. Press and hold WX/ALERT to turn Weather
Alert off.
26
ALERT
displays.
ALERT
goes away.