Attach Bracket/Install Radio - Uniden CMX760 Owner's Manual

slots. Be sure the slide mount latches face
outward.
2. Use the screws provided to fasten the guide
rails into position on the radio.

Attach Bracket/Install Radio

1. Using the screws provided, screw the
bracket into a stable, level surface. If
mounting the radio in a vehicle, for example,
screw the bracket onto the top of the
dashboard or underneath the dashboard.
Be sure the words "FRONT-SLIDE IN" are
visible from the front of the bracket.
Be sure you do not mount the bracket where
the screws can damage any wiring or
hardware. Move the wiring/hardware out of
the way or relocate the radio bracket.
2. Slide the back of the radio into the bracket
until the slide mounts latch and click into
place.
16
L-Tab
(2 on each rail)
L-Tab Slot
(2 on each side)
Slide Mount Latch
(1 on each rail)