Connect Power; Marine Installation; Connect Antenna - Uniden CMX760 Owner's Manual

Connect Power

1. Connect the power cord to the power
connector from the radio.
2. Connect the red DC power cord to the
Ignition Switch Accessory Terminal or the
positive (+) battery terminal.
3. Next, connect the black power cord to the
Ignition Switch Accessory Terminal, the
vehicle chassis, or negative (-) battery
terminal.
4. Start the vehicle. The unit should turn on.
Turn the vehicle off. The unit should turn off.

MARINE INSTALLATION

Consult your dealer for information regarding
marine installation. It is important to adequately
ground the system and to prevent electrolysis
between the fittings in the hull and the water.

CONNECT ANTENNA

Because the maximum power output of the
transmitter is limited by the FCC, the quality of
your antenna is very important. To achieve the
maximum transmission distance, Uniden strongly
recommends that you install only a high quality
antenna. You have just purchased a superior radio;
don't diminish its performance by installing an
inferior antenna.
12