Set Monitor Mode; Automatic Noise Limiter (Anl/Hi Cut) - Uniden CMX760 Owner's Manual

Set Monitor Mode

Turn on Monitor to have the radio search for
transmissions on the current channel.
1. Press and hold SQ/MON.
screen and
2. To stop monitoring, press and hold SQ/MON.
Monitor function stops and
not display on the screen.

Automatic Noise Limiter (ANL/HI CUT)

ANL (Automatic Noise Limiter) detects static
noise peaks and clips those peaks to preserve the
integrity of the received signal. HI CUT (High Cut)
attenuates signals higher than a specific threshold.
You can set either ANL or HI CUT on individually,
or both of them on at the same time. If both are
turned on,
1. Press ANL/HI CUT (on top of the speaker/
microphone) once. ANL on;
displays on the LCD.
2. Press and hold ANL/HI CUT. HIGH CUT is
HICUT
on;
3. To turn off ANL, press ANL/HI CUT.
longer displays.
4. To turn off HI CUT, press and hold ANL/HI
CUT.
BUSY
ANL HICUT
and
displays on the LCD.
HI CUT
no longer displays.
MON
displays.
MON
both display on the LCD.
blinks on the
BUSY
and
ANL
only
ANL
do
no
23