Boot - DFI SU551 User Manual

Boot

This section configures boot options.
InsydeH20 Setup Utility
Main Advanced Security Boot
Numlock <On>
Boot Type <Legacy Boot Type>
PXE Boot to LAN <Disabled>
USB Boot <Enabled>
Legacy

Numlock
Off
On
F1 Help ↑/↓ Select Item F5/F6
Esc Exit ←/→ Select Item Enter
Numlock
Select the power-on state for numlock.
Boot Type
Select the boot type. The options are Dual Boot Type, Legacy Boot Type or UEFI Boot
Type.
PXE Boot Capability
Disable or enable PXE boot to LAN.
USB Boot
Enable or disable the booting to USB boot devices.
Note:
If the boot type is set to UEFI, the method for RAID volume creation will be different.
Please refer to Chapter 5 - RAID for more information.
Chapter 3 BIOS Setup
Rev. 5.0
Exit
Selects Power-on state for
Numlock
Change Values F9 Setup Defaults
Select SubMenu F10 Save and Exit

Chapter 3
Legacy
This section configures legacy boot order.
Boot Device Priority
Normal Boot Menu
Boot Type Order

F1 Help ↑/↓ Select Item
Esc Exit ←/→ Select Item
Normal Boot Menu
Normal
Based on the boot normal priority, it determines the EFI device first or the legacy
device first.
Advance
All boot devices follow the user's selection sequence.
Boot Type Order
Select the priority of boot type: Normal Boot or Advance Boot.
33
InsydeH20 Setup Utility Rev. 5.0
Boot
Select Normal Boot Option
Priority or Advance Boot
Option Priority
<Normal>
Normal Boot Menu
Normal
Advance
F5/F6 Change Values F9 Setup Defaults
Enter Select SubMenu F10 Save and Exit

www.dfi.com