Figure 17: Signal Paths For Isolating Video Problems - Kramer VS-1616D User Manual

Figure 17: Signal Paths for Isolating Video Problems

11.1.1 Testing the Projector Output
Signal path: c to d; d to projector.
To test the projector output:
1. Configure Input 17 to Output 17 (see
2. Connect Output 17 to the projector.
3. Set the generated video resolution (see
4. Set the pattern for the generated video (see
5. Verify that the projector output is as expected.
11.1.2 Testing the Output Signal Path to the Projector
Signal path: a to b; b to projector
To test the output signal path to the projector:
1. Configure Input 17 to Output 1 (see
2. Connect Output 1 to the projector.
3. Set the generated video resolution (see
4. Set the pattern for the generated video (see
5. Verify that the projector output is as expected.
11.1.3 Testing the Input and Output Signal Path to the Projector
Signal path: c to e; e to f; f to b; b to projector.
To test the input and output signal path to the projector:
1. Configure Input 17 to Output 17 (see
2. Connect Output 17 to Input 1.
88 VS-1616D - Using the Test Module to Troubleshoot Video and Audio Problems
Section 6.4).
Section 8.2).
Section 8.3).
Section 6.4).
Section 8.2).
Section 8.3).
Section 6.4).