Table of Contents
Advertisement
77
BDL5585XL LCD
2.5.2 Power consumption
2.5.3 Display DPM standby (D-sub & HDMI input)
DPM -
Recovery from DPM - Power & function recover when either H & V syncs or digital clock
Standby - The Display enters "AV standby mode" when it's switched off by RC.
Recovery from Standby - Power & function recovers when RC "Power" is pressed.
2.6 User Control Interface
Controlled via top control keypads or remote control or RS-232 or RJ45.
2.6.1 Hidden controls
It can't be easily accessed in front of the set.
To be revised according to new graphic sheet.
`
Key
MENU
ENTER
VIDEO SOURCE
General Product Specification
Normal on -
Standby -
Switch off (DC or TACT) -
Switch off (AC mains) -
The Display enters DPM off (sleep) mode when no H&V sync, one of H-sync /
V-sync input or digital clock is absent. "No Video Input" message appears before
entering DPM mode. A delay of 15 seconds before entering the power saving
state is required to avoid misunderstanding of display resolution and timing mode
changes.
"Standby/Power" key or SLEEP TIMER function is activated or no AV signal
input for 15 seconds.
PC mode
DC switch power standby
Decrease/Volume down
Increase/Volume up
MENU Select Down
MENU Select Up
Enter /Exit OSD menu
81 w (typical), 131 w(max.)
< 0.5w, RC standby mode
< 0.5w, RC in-active
< No power consumption.
are detected.
DC switch power standby
Decrease/Volume down
Increase/Volume up
Menu Select Down/Channel Down
Menu Select Up/Channel up
Enter /Exit OSD menu
AV mode
Advertisement
Table of Contents
