Table of Contents
Advertisement
11. Press the EXIT button and the menu will close and the schedule
settings will take effect. To set up more schedule items, repeat the steps
above except that a different schedule item should be selected (schedule
item #2 (
2) through #7 (
Notes:
• Seven scheduling options are available so that you can choose between
different video input modes for different schedules during the week. For
example, VGA input on a Monday, HDMI on Tuesday to Friday, S-Video
for weekends.
• If you do not want to use a power on time, select "--" for the power on
hour slot, and "00" for the minute slot. The display will only turn off at the
time you set.
• If you do not want to use a power off time, select "--" for the power off
hour slot, and "00" for the minute slot. The display will only turn on at the
time you set.
• If no input source is selected, the default input source (Video) will be
used.
• If Every day is selected, the display will turn on everyday regardless of
other day settings (e.g Mon, Tue, Wed..., etc.).
• Should schedule periods overlap, the power on time has priority over
power off time. For example, if schedule item #1 sets the display to power
on at 10:00 AM and off at 5:00 PM, and schedule item #2 sets the display
to power on at 4:00 PM and off at 9:00 PM on the same day, then the
display will power on at 10:00 AM and off at 9:00 PM.
• If there are multiple schedule items programmed for the same time
period, then the highest numbered schedule item has priority. For
example, if schedule items #1 and #2 both set the display to power on at
7:00 AM and off at 5:00 PM, then only schedule item # 1 will take effect.
Monitor ID
Set the ID number for controlling the unit via the RS232C connection.
Each display must have a unique ID number when multiple BDL4785SL
units are connected. Each monitor's ID is defined by its position within the
matrix – starting on the top row, working left to right. The top left display
will have an ID of 1. When you reach the end of the row, the next number
will refer to the display one row down.
DDC/CI
Choose to turn On or Off the DDC/CI communication function. Select On
for the SmartControl II software use.
Use the UP/DOWN button to make selection.
HDMI with One Wire
One Wire uses the HDMI CEC (Consumer Electronics Control) industry
standard protocol to share functionality between connected devices and
the display. To transfer system commands, you need to use an HDMI
cable to connect the display to a device equipped with HDMI CEC. Select
On in this menu and you can operate the main functionalities on your
display and the connected device with one remote control. For
instructions on how to use the One Wire function, please refer to the One
Wire DFU on the accompanying CD ROM.
Notes:
• The One Wire-compliant device must be switched on and selected as
the source.
• Philips does not guarantee 100% interoperability with all HDMI CEC
devices.
Smart power
Set the display to reduce the power consumption automatically. Setting to
High will bring the most power savings.
Use the UP/DOWN button to toggle between
• Off
• Medium
• High
Auto signal detection
Select to let the unit detect and display available signal source
automatically.
• On - Set the unit to display the image automatically once a signal is
connected.
• Off - Once a signal is connected, it can only be selected manually. Use
the UP/DOWN button to make selection.
Settings cloning
Select Monitor to USB or USB to Monitor to transfer all the OSD settings
between the display and a USB flash drive.
Advanced option reset
Reset all settings in the Advanced option menu. Press the PLUS button
to open the submenu, and then press PLUS/MINUS to make selection.
On-Screen Display
7)) in step 2.
Select Reset and press the SET button to restore settings to factory
preset values. Press the EXIT button to cancel and return to the previous
menu
Firmware update MENU
From USB
To update the display firmware:
1. Take a USB flash drive and make sure it is formatted with FAT32.
2. Create a folder and name it "fupgrade" on the USB flash drive.
3. Obtain the firmware named "usb_rootfs" and put it into the folder
"fupgrade".
4. Plug the USB flash drive into the USB port on the display.
5. Highlight Active in the Firmware update > From USB menu and press
SET.
6. Select Yes to start update. A status message appears.
7. After the update process completes, the display will re-start
automatically.
Notes:
• The display does not support USB flash drives with NTFS format.
• Do not turn off the display during the update process. It may damage the
display if you do.
• If the error message appears on the Firmware Update OSD menu,
please make sure that:
• the USB flash drive is properly plugged in.
• the folder name (fupgrade) and file name (usb_rootfs) are correct.
• the model name shown on the OSD menu is the same as the display's
• the firmware version is different from the old one. The display will not
be updated if you are using the same version.
BDL4785SL LCD
15
Advertisement
Table of Contents
