Table of Contents
Advertisement
4
BDL4785SL LCD
REAR VIEW
1.
SWITCH ON/OFF
Turns the power from the control box on or off.
2.
POWER
Connects to the DISPLAY POWER connector on the control
box.
3.
SIGNAL
Connects to the DISPLAY SIGNAL connector on the control
box.
INSTALLATION NOTES
• The product should be installed on a flat surface to avoid
tipping. Maintain a distance of at least 6cm between the back
of the display and the wall for proper ventilation. Avoid
installing the unit in a kitchen, bathroom or any other place
with high humidity so as not to shorten the service life of the
electronic components.
• Do not place this product on the floor and keep away from
children.
• The product can normally operate only under 4000m in
altitude. In installations at altitudes above 4000m, some
abnormalities may be experienced.
• Ensure that the power is turned off before connecting the
display and control box.
• Before using the display, connect the power cord and Display
port cable on the back of the display to the DISPLAY
POWER and DISPLAY SIGNAL ports on the control box.
Installation
INPUT/OUTPUT TERMINALS
1.
AUDIO IN (AUDIO1)
Connects to the audio output of a computer.
2.
AUDIO OUT R/L
Outputs the audio signal from the AUDIO IN
(AUDIO1/AUDIO2/AUDIO3), DISPLAY PORT or HDMI jack.
3. SPEAKERS R/L
Outputs the audio signal from the AUDIO IN
(AUDIO1/AUDIO2/AUDIO3), DISPLAY PORT or HDMI jack to
external speakers.
4. AUDIO IN (AUDIO2/AUDIO3)
Connects to the audio output of an AV device.
5. RJ-45
Connects to the RJ-45 port on your Ethernet or router.
6. RS-232C (IN/OUT)
RS232C network connection input/output for the use of loop
through function.
7. USB
Connects to a USB flash drive (for firmware updates and display
cloning only).
8. YPbPr
Component video input (YPbPr) for connecting to the component
output of an AV device.
9. VGA OUT
Outputs the VGA signal from the VGA IN jack.
10. VGA IN
Connects to the VGA output of a PC or media player.
11. DVI-D OUT
Outputs the DVI-D signal from the DVI-D IN jack.
12. DVI-D IN
Connects to the DVI-I connector of a PC (receiving only the
DVI-D signal) or to the HDMI output of an AV device (Using a
DVI-HDMI cable).
13. DISPLAY SIGNAL
Connects to the SIGNAL connector on the display and outputs a
signal to it.
14. DISPLAY POWER
Connects to the POWER connector on the display and outputs
power to it.
15. DISPLAY PORT
Connects to a Display port compatible device.
16. HDMI
Connects to the HDMI output of an AV device or to the DVI-D
output of a PC. (Using a DVI-HDMI cable/ adapter)
17. AC OUT (1.5 A)
Can be used to power an external media device.
18. AC IN (4.0 A)
Connects the supplied power cord to the wall outlet.
19. Main power switch Press to switch the main power on/off.
Advertisement
Table of Contents
