Table of Contents
Advertisement
AUDIO
MENUA
U
Speaker
Set the display to play audio using the external speakers or
external audio devices (if connected). Use the UP/DOWN button
to toggle betwee
• External
• Line-out
Volume
Adjust to increase or decrease the audio output level.
Use the PLUS/MINUS button to adjust.
Balance
Adjust to increase or decrease the audio balance level.
Use the PLUS/MINUS button to adjust.
Treble
Adjust to increase or decrease the treble.
Use the PLUS/MINUS button to adjust.
Bass
Adjust to increase or decrease the bass.
Use the PLUS/MINUS button to adjust.
Mute Turns the mute function on/off.
Use the UP/DOWN button to make selection.
Audio source
Select the audio input source – toggle between audio input,
DISPLAY PORT, and HDMI
Use the UP/DOWN button to toggle between
•AUDIO 1
• AUDIO 2
•AUDIO 3
• HDMI
Audio reset
Reset all settings in the Audio menu.
Use the PLUS/MINUS button to make selection. Select Reset and press
the SET button to restore settings to factory preset values. Press the
EXIT button to cancel and return to the previous menu
On-Screen Display
•Display port
Configuration 1 MENU
Switch on state
Set the display to turn on or remain off when the power cord is connected
to a wall outlet.
Use the UP/DOWN button to toggle between
• Last status - The display will return to the previous power status
(on/off/standby) when removing and replacing the power cord.
• Forced on - The display will turn on when the power cord is connected
to a wall outlet.
• Power off - The display will remain off when the power cord is
connected to a wall outlet.
Note: If you unplug the power cord and re-plug within 7 seconds, the
display will not work under the selected setting.
Auto adjust
Note: For VGA input only.
Use this function to automatically optimize the VGA image within the
display. Press SET to adjust.
Power save
Set the display to reduce the power consumption.
Use the UP/DOWN button to toggle between
• PC - Select On to let the display enter DPMS (Display Power
Management Signaling) mode when no signal can be detected from the
HDMI, DVI-D, and VGA inputs after three successive cycles. Use the
PLUS/ MINUS button to make selection.
• Video - Select On to let the display enter power saving mode when no
signal is detected from the Component input after three successive
cycles. Use the PLUS/MINUS button to make your selection.
Language
Select the language for the OSD menu.
Use the UP/DOWN button to select a language.
Panel saving
Choose to enable the panel saving functions to reduce the risk of the
"image persistence". Use the UP/ DOWN button to toggle between
• Cooling fan - Select Auto and the fan will turn on when the display
gets to a certain level in order to expel hot air and cool the unit. Select
On/Off to keep the fan on/off. Use the UP/DOWN button to make your
selection.
Notes:
• When Auto is selected, the cooling fans will turn on when the
temperature reaches 55°C (131°F) and will turn off when the temperature
has decreased to 50°C (122°F).
• The display will shut down automatically if the temperature reaches
82°C (179.6°F) no matter what settings have been selected.
Brightness - Select On and the brightness of the image will be
reduced to an appropriate level, and the Brightness setting in the
Picture menu will become unavailable. Use the PLUS/MINUS button to
make selection.
• Pixel shift - Select the time interval for the display to slightly expand the
image size and shift the pixel position in four directions (up, down, left,
and right). Use the PLUS/MINUS button to make selection (Off-900
seconds from current time). The default time interval is 300 seconds. This
helps to alleviate the issues of image sticking.
BDL4785SL LCD
11
Advertisement
Table of Contents
