Table of Contents
Advertisement
71
BDL5585XL LCD
Fault diagnostics
Advanced anti image sticking
Automatic Long Cable Compensation
PIP support
Scheduling
USB OSD cloning
Display port input
1.2 Product Range
Display
BDL4785SL/00
2. ELECTRICAL REQUIREMENTS
All performance specifications are defined under "STANDARD TESTING CONDITIONS", unless
otherwise specified.
2.1 Standard Testing Conditions
Warm up time -
Ambient temperature - 15 C ~35 C.
Ambient light -
Relative humidity -
Barometric pressure - 860 mbar ~ 1013 mbar.
Dark room conditions - < 1 lux for optical measurements
2.2 Video / Audio Input Signals
2.2.1
PC input signal requirements
Pixel rate capability -
VGA sync input -
HDMI input -
VGA analog RGB level - 0 ~ 700mV linear, positive polarity, terminated with 75 impedance.
I²C DDC signal -
General Product Specification
Destination
EU
30 min.
400-600 lux
25% ~ 75%.
86 MHz.
TTL level, separate H/V sync only, "+" or "-" polarity,
terminated with 2.2k impedance.
TMDS channel:
DDC channel:
DDC2B required, DDC serial Data & Clock, DDC components are
Mains Cord
EU, UK
Carries video data.
Signaling method: According to DVI 1.0 specification.
Single-link (Type A HDMI).
Video pixel rate: 25 MHz to 165 MHz (Type A)
Allows source to interrogate capabilities of sink.
I²C signaling with 100 kHz clock.
E-EDID data structure according to EIA/CEA-861B and
VESA Enhanced EDID.
Cabinet Color
Generic Black
Advertisement
Table of Contents
