Configuration 2 Menu; Advanced Option - Philips BDL4785SL/00 Service Manual

Configuration 2 MENU

OSD turn off
Set the period of time the OSD menu stays on the screen (from 5 to 120
seconds since the last key stroke) Use PLUS/MINUS to adjust.
OSD mode
Select the orientation of the OSD according to the orientation the display
is installed. Use the UP/DOWN button to toggle between
• Portrait • Landscape
Information OSD
Set the period of time the information OSD stays on the screen. The
information OSD will display when input signal is changed.
Use the UP/DOWN button to adjust. The information OSD will not appear
when Off is selected. If 0 is selected, the information OSD will remain on
the screen.
Sleep timer
Set the display to turn itself off to standby mode within a user-specified
amount of time. (Off-24 hours from current time)
Use the UP/DOWN button to adjust.
Note: When the Sleep timer is activated, Schedule settings will be
disabled.
OSD H position
Adjust the horizontal position of the OSD menu. Use the UP/DOWN
button to adjust.
OSD V position
Adjust the vertical position of the OSD menu. Use the UP/DOWN button
to adjust.
Monitor information
Shows the information about your display. Press the PLUS button to view
the information. Press the EXIT button to return to the previous menu

ADVANCED OPTION

MENUADVA
On-Screen Display
NCED
INPUT RESOLUTION
Input resolution
Note: For VGA input only.
Set the resolution of the VGA input. This is only required when the display
is unable to detect the VGA input resolution correctly.
Use the UP/DOWN button to toggle between
• AUTO • 1024x768
• 1360x768 • 1366x768
BLACK LEVEL EXPANSION
Note: For Component, and HDMI (video mode) inputs only.
This feature offers deeper blacks for an even better image quality. Select
a suitable black level expansion setting to reveal more details in the dark
parts of an image. Use UP/DOWN to toggle between
• OFF • LOW
• MIDDLE • HIGH
GAMMA SELECTION
Gamma is what controls the overall brightness of an image. Images
which are not corrected properly can appear too white or too dark, so
controlling the gamma properly can have a huge influence on the overall
picture quality of your display. Select a display gamma value to best suit
the image and optimize image brightness and contrast. Use the
UP/DOWN button to toggle between
• 2.2 • 2.0
SCAN MODE
Note: For Component, and HDMI (video mode) inputs only.
Change the display area of the image.
Use the UP/DOWN button to toggle between
• Overscan - Displays about 95% of the original size of the image. The
rest of the areas surrounding the image will be cut off.
• Underscan - Displays the image in its original size.
Scan conversion
Note: For Component, and HDMI (video mode) inputs only.
Choose to enable or disable the IP (Interlace to Progressive) conversion
function. Use the UP/DOWN button to toggle between
• Progressive - Enable the IP conversion function (recommended). Once
enabled, the interlace input signal will be converted to progressive format
for better display quality.
• Interlace: Disable the IP function. This mode is suitable for displaying
motion pictures, but increases the chance of image retention.
Film mode
Note: For Component, and HDMI (video mode) inputs only.
Choose to turn on or off the film mode frame conversion function.
Use the UP/DOWN button to toggle between
• Auto - Enable the film mode frame conversion function for movies and
motion pictures. The display converts a 24 frames-per-second (24 fps)
input signal format into DVD video signal format. Once this function is
enabled, we recommend that you set the Scan conversion function to
Progressive.
• Off - Disable the film mode frame conversion function. This mode is
suitable for TV broadcasting and VCR signals.
IR control
Select the operation mode of the remote control when multiple
BDL4785SL units are connected via RS232C cables.
Use the UP/DOWN button to toggle between
• Normal - All units can be operated normally by the remote control.
• Primary - Designate this display as the primary unit for remote control
operation. Only this display will be operated by the remote control.
• Secondary - Designate this display as the secondary unit. This display
can not be operated by the remote control, and will only receive the
control signal from the primary unit via the RS232C connection.
• Lock - Lock the remote control function of this display. To unlock, press
and hold the DISPLAY button on the remote control for 5 seconds.
BDL4785SL LCD
• 1280x768
• NATIVE
13