Configuration Menu - Philips 75BDL8051C User Manual

75BDL8051C/86BDL8051C
Treble
Adjust to increase or decrease higher-pitched sounds.
Bass
Adjust to increase or decrease lower-pitched sounds.
Volume
Adjust the volume.
Audio out (Line out)
Adjust to increase or decrease line out output level.
Maximum volume
Adjust your own limitation for the maximum volume setting.
This stops the volume at the sound level you set.
Minimum volume
Adjust your own limitation for the minimum volume setting.
Mute
Turn the mute function on/off.
Audio source
Select the audio input source. Audio output is not supported
when there is no video signal.
• {Analog} - Audio from audio input. (Audio from OPS
audio input when OPS is selected as source)
• {Digital} - Audio from video input source. (VGA and DVI
are not supported)
Audio reset
Reset all settings in the Audio menu to factory preset values
for current source.
Audio Out Sync
Line out volume sync with Volume.
• {On} - Enable the function.
• {Off} - Disable the function and Audio Out Volume will
be grayed out.
Speaker Setting
Enable/disable speaker.
NOTE: This function is available only when "Audio Out
Sync" is on.

5.2.4. Configuration menu

Switch on state
Select the display status that will be applied when you
connect the power cord next time.
• {Power off} - The display will remain off when the power
cord is connected to a wall outlet.
• {Forced on} - The display will turn on when the power
cord is connected to a wall outlet.
• {Last status} - The display will return to the previous
power status (on/off/standby) when removing and
replacing the power cord.
Panel saving
Choose to enable the panel saving functions and thus
reduce the risk of image persistence or ghost imaging.
• {Brightness} - Select {On} and the image brightness will
be reduced to 30%.
• {Pixel shift} - Select the time interval ({Auto} / {10 ~ 900}
seconds ) for the display to slightly expand the image
size and shift the position of pixels in four directions (up,
down, left, or right). Activating Pixel Shift will disable H
Position, V Position and Zoom Mode in the screen menu.
NOTES:
• Auto is 60 seconds.
• Only supports external input source (HDMI, VGA, DP,
OPS, DVI)
RS232 routing
Select the network control port.
Choose from: {RS232} / {LAN->RS232} / {CardOPSRS232
(OPS model only)} / {STANDALONE}.
Boot on source
Choose to select source when booting up.
Last Input : keep last input when booting up.
Input: select input source(follow S12 Input source) when
booting up.
Playlist: select playlist index for Media player, Browser, PDF
player.
0: No playlist. Same as switching source from OSD.
1~7: playlist number.
8: MediaPlayer autoplay.
No failover function, sysytem will keep source even the
source has no signal input.
WoL
Choose to turn on or off the wake on LAN function.
Choose from : {Off} / {On}.
DP Version
Change DP version. 1.1 or 1.2.
HDMI Version
Change HDMI version. 1.4 or 2.0.
System rotation
Rotate the OSD menu. The options are 0/90/180/270
degree.
NOTE: Only supports rotation of Android UI. (Non-Android
source is not supported.)
Information OSD
Set the period of time the information OSD display on the
screen. The options are {Off, 1-60} seconds.
26