Basic Function; Standby Mode - Blaupunkt BT 55e Instruction Manual

Bluetooth boombox with usb

Table of Contents

BT 55e

BASIC FUNCTION

Turn on the unit

Slide the rear panel Power knob (16) to ON position. The LED display (13) will flash on

as below.

Select play source

Press Source button (1) to turn on and select BLUETOOTH/RADIO/USB or LINE IN play

mode. Press and hold the source button, the unit will power off.

Note:

a. The unit will go to STANDBY mode automatically after 15 minutes if there is no play

mode selection, meanwhile, the LED display will turn off. You can press the source

button to resume the unit.

b. On Bluetooth, USB and Line in mode, if there is no music signal input to the

speaker lasting 15 minutes, the unit will go to standby mode automatically. And the

LED display will turn off totally after another 15 minutes in order to save power and

perform the ERP 2 requirement. You can press the source button to resume the

function operation.

Adjust Volume

Press VOLUME+ (6) up or VOLUME – (5) down to increase or decrease volume.

POWER AND CHARGING OPERATION

The boombox can operate with the built-in rechargeable battery. To charge the

built-in battery, please reference as below:

Insert the one end of supplied USB cable to the micro USB charge port (18 ) on the

rear panel of the unit, and the another terminal shall be connected with universal

USB power source like laptop PC etc..

When the unit starts to charge, the front LED indicator (12) will light on in yellow

color; the front LED indicator (12) will turn off after the battery is fully charged.

The battery fully charging time is about 3-5 hours.

When you do not want to listen music during a long time, we suggest you to slip

the rear panel power knob (16) to OFF position in order to save battery power.

Table of Contents