When And How To Use - Getac S410 User Manual

When and How to Use

You need to run BIOS Setup Utility when:
You see an error message on the screen requesting you to run BIOS

Setup Utility.
You want to restore the factory default BIOS settings.

You want to modify some specific settings according to the hardware.

You want to modify some specific settings to optimize the system

performance.
To run BIOS Setup Utility:
1. For Windows 10 models: Click
Recovery. Under Advanced startup, click Restart now. In the boot
options menu, click Troubleshoot  Advanced options  UEFI Firmware
Settings. Click Restart. In the next menu that appears, use the arrow key
to select Setup Utility and press Enter.
For Windows 7 models: Press the F2 key when the prompt appears on
the screen during system startup.
2. The BIOS Setup Utility main screen appears.
In general, you can use the arrow keys to move around and + / – keys to
change the setup values. Keyboard information can be found at the
bottom of the screen.
NOTE:
The actual setting items on your model may differ from those described

in this chapter.
The availability of some setting items depends on the Windows version

your computer is running.
 Settings  Update & security 
64