Displaying Vss Information - Cisco Catalyst 4500 series Administration Manual

Configuring a VSS
slot 4 slot-type 225 port-type 61 number 48
slot 5 slot-type 82 port-type 31 number 2
These commands are not available to the user and that various numbers used in these commands are
internal to the system and used to identify a module. These commands are written to the startup-config
when a switch detects a given module while it is running in VSS mode. When reconverted to standalone
mode, these commands are removed from the startup-config.

Displaying VSS Information

To display basic information about the VSS, perform one of these tasks:
Command
Switch# show switch virtual
Switch# show switch virtual role
Switch# show switch virtual link
The following example shows the information output from these commands:
Switch# show switch virtual
Executing the command on VSS member switch role = VSS Active, id = 1
Switch mode
Virtual switch domain number : 100
Local switch number
Local switch operational role: Virtual Switch Active
Peer switch number
Peer switch operational role : Virtual Switch Standby
Executing the command on VSS member switch role = VSS Standby, id = 2
Switch mode
Virtual switch domain number : 100
Local switch number
Local switch operational role: Virtual Switch Standby
Peer switch number
Peer switch operational role : Virtual Switch Active
Switch# show switch virtual role
Executing the command on VSS member switch role = VSS Active, id = 1
RRP information for Instance 1
--------------------------------------------------------------------
Valid
--------------------------------------------------------------------
TRUE
Switch
--------------------------------------------------------------------
Software Configuration Guide—Release IOS XE 3.6.0E and IOS 15.2(2)SG
5-38
: Virtual Switch
: 1
: 2
: Virtual Switch
: 2
: 1
Flags Peer Preferred
Count Peer
V 1 1
Switch Status Preempt
Number Oper(Conf)
Chapter 5
virtual-slot 36
virtual-slot 37
Purpose
Displays the virtual switch domain number, and the
switch number and role for each of the switches.
Displays the role, switch number, and priority for
each of the switch in the VSS.
Displays the status of the VSL.
Reserved
Peer
1
Priority Role Local
Oper(Conf) SID
Configuring Virtual Switching Systems
Remote
SID
OL-30933-01