Displaying The Dns Configuration - Cisco Catalyst 4500 series Administration Manual

Creating a Banner
Command
Step 6
show running-config
Step 7
copy running-config
startup-config
If you use the switch IP address as its hostname, the IP address is used and no DNS query occurs. If you
configure a hostname that contains no periods (.), a period followed by the default domain name is
appended to the hostname before the DNS query is made to map the name to an IP address. The default
domain name is the value set by the ip domain-name global configuration command. If there is a
period (.) in the hostname, the Cisco IOS software looks up the IP address without appending any default
domain name to the hostname.

Displaying the DNS Configuration

To display the DNS configuration information, use the show running-config privileged EXEC
command.
Creating a Banner
You can configure a message-of-the-day (MOTD) and a login banner. The MOTD banner displays on all
connected terminals at login and is useful for sending messages that affect all network users (such as
impending system shutdowns).
The login banner also displays on all connected terminals. It appears after the MOTD banner and before
the login prompts.
For complete syntax and usage information for the commands used in this section, see the Cisco IOS
Note
Configuration Fundamentals Command Reference, Release 12.3.
The contain this configuration information:
•
•
•
Default Banner Configuration
The MOTD and login banners are not configured.
Configuring a Message-of-the-Day Login Banner
You can create a single or multiline message banner that appears on the screen when someone logs in to
the switch.
Software Configuration Guide—Release IOS XE 3.6.0E and IOS 15.2(2)E
4-24
Purpose
Verifies your entries.
(Optional) Saves your entries in the configuration file.
Default Banner Configuration, page 4-24
Configuring a Message-of-the-Day Login Banner, page 4-24
Configuring a Login Banner, page 4-27
Chapter 4 Administering the Switch
OL-30933-01