Offset Prefix
Use this feature to set the Offset value as a positive (+) number or a nega-
tive (-) number. Press "+" or "-" on your keyboard to make a selection. The
default setting is "+".
IOD Voltage Offset (mV)
Use this feature to set the IOD Voltage Offset value between -1000mV and
998mV. Enter 0 to use the default setting.
Offset Prefix
Use this feature to set the Offset value as a positive (+) number or a nega-
tive (-) number. Press "+" or "-" on your keyboard to make a selection. The
default setting is "+".
PCH-FW Configuration
The following information are displayed:
•
ME FW Version
•
ME Firmware Mode
•
ME Firmware Type
•
ME Firmware SKU
•
PTT Capability/State
Firmware Update Configuration
ME FW Image Re-Flash
Select Enabled to re-flash the ME (Management Engine) Firmware. The options
are Disabled and Enabled.
4-27
Chapter 4: AMI BIOS