Supermicro C7Z87 User Manual page 87

Chapter 4: AMI BIOS
cards palette and mimic it for proper color display. The options are Disabled and
Enabled.
PERR# Generation
Select Enabled to allow a PCI device to generate a PERR number for a PCI Bus
Signal Error Event. The options are Enabled and Disabled.
SERR# Generation
Select Enabled to allow a PCI device to generate an SERR number for a PCI Bus
Signal Error Event. The options are Enabled and Disabled.
Slot1 PCI 33 MHz OPROM/Slot2 PCI 33 MHz/Slot3 PCI-E 2.0 X1 OPROM/
Slot4 PCI-E 3.0 x8 (In x 16) OPROM/Slot5 PCI-E 2.0 x1 OPROM/Slot6 PCI-E
3.0 x16 OPROM/Slot7 PCI-E 2.0 x1 OPROM
Use this feature to enable or disable Option ROM support to boot the computer us-
ing the device installed on a PCI or a PCI-E slot specified by the user. The options
are Disabled, Legacy and EFI.
Launch Storage OPROM Policy
This feature controls how the system executes UEFI (Unified Extensible Firmware
Interface), and legacy storage OPROM. Select Legacy Only to boot the system using
a legacy device installed in a PCI slot. The options are UEFI Only and Legacy Only.
Other PCI Device ROM Priority
This feature selects a PCI device Option ROM for system boot if this device is not
a network, mass storage, or video device. The options are UEFI Only and Legacy
Only.
Onboard LAN1 Option ROM/Onboard LAN2 Option ROM
Select iSCSI to use the iSCSI Option ROM to boot the computer using an iSCSI
device installed in a LAN port specified. Select PXE (Preboot Execution Environ-
ment) to boot the computer using a PXE device installed in a LAN port specified.
Select Disabled to prevent system boot using a device installed in a LAN port.
The options for Onboard LAN1 Option ROM/Onboard LAN2 Option ROM are Dis-
abled and PXE.
Network Stack
Select Enabled to enable PXE (Preboot Execution Environment) or UEFI (Unified
Extensible Firmware Interface) for network stack support. The options are Enabled
and Disabled.
4-19