Table of Contents
Advertisement
Chapter 4: AMI BIOS
Power Limit 1 Time (Available when "Turbo Mode" is set to Enabled)
This item allows the user to determine how long CPU1 should operate at the
power limit set by the user for the item above. Use the number keys on your
keyboard to enter the value. The default setting is 8.
Power Limit 2 Switch (Available when "Turbo Mode" is set to Enabled)
Select Enabled for power limit switch for CPU2. The settings are Disabled and
Enabled.
Power Limit 2 Value (Watt) (Available when "Turbo Mode" is set to
Enabled)
Use this feature to set the power limit for CPU2. Use the number keys on your
keyboard to enter the value. The default setting is 43.
1 Core Ratio Limit (Available when "Turbo Mode" is set to Enabled)
This increases (multiplies) 1 clock speed in the CPU core in relation to the bus
speed when one CPU core is active. Press "+" or "-" on your keyboard to change
the value. The default setting is 30.
2 Core Ratio Limit (Available when "Turbo Mode" is set to Enabled)
This increases (multiplies) 2 clock speeds in the CPU core in relation to the bus
speed when two CPU cores are active. Press "+" or "-" on your keyboard to
change the value. The default setting is 29.
3 Core Ratio Limit (Available when "Turbo Mode" is set to Enabled)
This increases (multiplies) 3 clock speeds in the CPU core in relation to the bus
speed when three CPU cores are active. Press "+" or "-" on your keyboard to
change the value. The default setting is 27.
4 Core Ratio Limit (Available when "Turbo Mode" is set to Enabled)
This increases (multiplies) 4 clock speeds in the CPU core in relation to the bus
speed when four CPU cores are active. Press "+" or "-" on your keyboard to
change the value. The default setting is 26.
Disable OverClocking Lock
If this feature is set to Enabled, the OverClocking Lock will be deactivated. The
options are Disabled and Enabled.
ICC (Intelligent Clock Control) Clock Setting
Host Clock Override (1/100 MHz)
Use this item to set the CPU clock override value for the host system. Press "+"
or "-" on your keyboard to change the value. The default setting is 0.
4-23
Hide quick links:
Advertisement
Table of Contents
