Supermicro C7Z87 User Manual page 93

Overclocking RING Option

The following Overclocking RING Option submenu items will display:
RING Adaptive Voltage Target (mV)
Use this feature to set the RING Adaptive Voltage Target(mV) value from 0mV
to 2000mV. Enter 0 to use the manufacture default value.
RING Voltage Mode
Use this feature to select the CPU RING Voltage mode. The options are Over-
ride and Adaptive.
RING Voltage Offset (mV)
Use this feature to set to set the RING Voltage Offset value from -1000mV to
998mV. Enter 0 to use the manufacture default value.
Offset Prefix
Use this feature to set the Offset value as a positive (+) number or a nega-
tive (-) number. Press "+" or "-" on your keyboard to make a selection. The
default setting is "+".
Overclocking SVID and FIVR Option

The following Overclocking SVID and FIVR Option submenu items will display:
SVID Control Enable
Select Enabled to enable SVID control for Intel SVID Protocol support. If this
setting is set to Disabled, there will be no change made to SVID until the CPU
powers down. The options are Enabled and Disabled.
SVID Override Voltage Target (mV)
Use this feature to set the value for SVID Override Voltage Target (up to 2500
mV). Enter 0 to use the manufacture default value.
FIVR Faults Enable
Select Enabled to enable FIVR Faults support. If this setting is set to Disabled,
there will be no change made to FIVR Faults settings until the CPU powers
down. The options are Enabled and Disabled.
FIVR Efficiency Enable
Select Enabled to enable FIVR Efficiency support. If this setting is set to Disabled,
there will be no change made to FIVR Efficiency status until the CPU powers
down. The options are Enabled and Disabled.
4-25
Chapter 4: AMI BIOS