CPU on-die temperature increases, the fan speed will also increase for effective
system cooling. Select "Full Speed" to allow the onboard fans to run at full speed
(of 100% Pulse Width Modulation Duty Cycle) for maximum cooling. This setting
is recommended for special system configuration or debugging. Select "Standard"
for the onboard fans to run at 50% of the Initial PWM Cycle in order to balance the
needs between system cooling and power saving. This setting is recommended for
regular systems with normal hardware configurations. The options are Full Speed
(@100% of PWM Cycle), and Standard (@50% of PWM Cycle).
The following items will be displayed:
•
CPU Temperature (PECI)
•
Front Side Sys. (System) Temperature
•
Rear Side Sys. (System) Temperature
•
PCH Temperature
•
Fan 1 Speed ~ Fan 5 Speed
•
VCORE
•
12V
•
VDIMM
•
5Vcc
•
PCH 1.05V
•
AVCC
•
3.3Vcc
•
VSB
•
VBAT
4-29
Chapter 4: AMI BIOS