Configuring A Wireless Lan; Selecting And Registering An Access Point; Registering An Access Point Using The Wps Function - Sony HXR-NX5R Operating Manual

Configuring a wireless LAN

You can connect the camcorder to a
network using a wireless LAN.
Selecting and registering an
access point
You can connect the camcorder and an
access point using a wireless LAN.
1
Press the MENU button.
2
Select
[Wi-Fi SET] t [ACCESS POINT
SET].
After a short delay, a list of access
points that can be connected is
displayed.
3
Select an access point to register.
If an access point you want to register is
not displayed, select [Manual setting]
and configure settings manually (p. 70).
4
Enter the password, and select
[Next].
Password entry is not required for
access points that do not display
5
Configure the access point
settings.
IP address
Select the IP address configuration
method.
When [Manual] is selected, enter the IP
address configuration items displayed
on the screen, and select [OK].
68
(NETWORK SET) t
Priority Connection
Select whether to configure connection
priority for access points.
z Tip
• Selecting [DNS server setting] on the IP
ADDRESS SET screen will display the DNS
server setting screen.
6
Select [Register].
• Connection to the access point is
initiated.
• [Registered.] appears when the access
point is registered successfully. The
SSID of the registered access point is
also displayed.
7
Select
MENU button to close the menu
screen.
Registering an access point
using the WPS function
You can register an access point quickly if
the access point supports the WPS function.
.
1
Turn on the access point.
2
Turn on the camcorder.
3
Press the MENU button.
4
Select
[Wi-Fi SET] t [WPS].
After a short delay, the following screen
appears.
t
, and press the
(NETWORK SET) t