Sony HXR-NX5R Operating Manual page 43

from the menu ([WB OUTDOOR LEVEL],
p. 88).
• You can change the color temperature when set
to [MANU WB TEMP]. Press the WB SET
button C and turn the SEL/SET dial E ([WB
TEMP SET], p. 88).
To save the adjusted white balance
value in memory A or B
1 Set the AUTO/MANUAL switch D to
MANUAL.
2 Press the WHT BAL button A to
display the WHT BAL indicator.
3 Select A ( A) or B (
4 Frame a white object such as a piece of
paper that fills the screen under the
same lighting conditions as your
subject.
5 Press the WB SET button C.
The adjusted value is stored in
B. The stored color temperature
appears for about 3 seconds.
b Notes
• When a white balance adjustment value has not
been obtained successfully,
starts flashing slowly. Adjust the subject
appropriately and set the shutter speed to auto or
around 1/60 (60i model)/1/50 (50i model), then
try adjusting the white balance again.
• It may take a long time to adjust the white
balance, depending on the recording conditions.
If you want to perform a different operation
before completing the adjustment, set the B/A/
PRESET switch B to another position to
temporarily suspend white balance adjustment.
To restore automatic adjustment
Press the WHT BAL button A.
b Note
• When you set the AUTO/MANUAL switch D
to AUTO, the iris, gain, shutter speed, and white
balance are adjusted automatically. You cannot
adjust them manually.
B).
A or
A or B
43