Section 18 Firmware Release History - Pronto MAGICARD 3649 - 0001 Maintenance Manual

Ultra Electronics Ltd
SECTION 18 FIRMWARE RELEASE HISTORY
Introduction
This is the amendment record for the Magicard Pronto printer Firmware (Software Identifcation Number
2221). This document is updated whenever a new version of the Firmware is released.
6-Oct-2009 | Release V1.09
1. Re-release of previous version due to Compiler fault.
6-Oct-2009 | Release V1.07
1. Updated the executable Firmware updater. This now handles multiple Printers connected at once.
23-Sep-2009 | Release V1.06
1. Added some extra debouncing to the sensor signal from the encoding module.
2. Updated dye LED calibration process to permit the use of either 5 or 6 panel Film.
3. Fixed soft power-off.
3-Sep-2009 | Release V1.05
1. Fixed a misregistration issue which affects some machines when photographs are printed against
primary colour backgrounds.
2. Leave fan on for longer for the 'RUNFAN' diagnostic command.
12-Aug-2009 | Release V1.04
1. Printer now avoids unnecessary Film usage when waking from sleep mode.
2. Reduced the occurrence of a resin line where the Head is dropped onto the Card.
3. Fixed problem where Firmware version was not being displayed corectly in the Printer query.
23-Jun-2009 | Release V1.03
1. Ensure printhead fan is switched off while waiting for the printed card to be removed from the exit slot.
2. Improved Resin Black printing method.
3-Jun-2009 | Release V1.02
1. Reduce the occurrence of a rogue Black Resin line.
2. Fixed bug in which sometimes caused the first Card to be blank when printing Resin-only images.
26-May-2009 | Release V1.01
1. Improved Print Head temperature control during Overcoat panel.
22-May-2009 | Release V1.00
1. Initial production release.
Pronto Maintenance Manual
- 77 -