Section 9 Printer Functions; Printing A Test Card; Printer Cleaning Mode - Pronto MAGICARD 3649 - 0001 Maintenance Manual

SECTION 9 PRINTER FUNCTIONS
SECTION 9.1.1

PRINTING A TEST CARD

The Pronto is able to print an internal Test Card independently of it's Host Computer. This function is useful test to check
the Printer is working correctly without involving any Computer software or Printer Driver settings.
To print a Test Card, press the Pronto's front panel switch twice (quickly in succession).
The colour of the front pabel switch should change from green to yellow.
After a short delay (whilst downloading the Test Card image), the Pronto's Rollers should start to turn.
At this point, a Card should be fed into the Printer's front panel slot. The result should be the Test image shown below:
SECTION 9.1.2

PRINTER CLEANING MODE

The Pronto can be put into a cleaning mode using the following procedure :
1. If using Windows XP, go from the "START" Button and select "Printers and Faxes".
2. In the "Printers and Faxes" window, right-click on the Driver icon and select "Printing Preferences..."
3. Using the "Card Front" Tab, click the "Clean the Printer" Button. The Printer's Rollers should now start to turn.
4. Finally, remove a Cleaning Card from it's foil packet and feed the narrow end into the front of the Pronto.
Ultra Electronics Ltd
Pronto Maintenance Manual
- 30 -