Table of Contents
Advertisement
Figure 9. Operation Mode for Password Setting
3.
As shown in Figure 10, select Option tab and check 'Enable' combo box of "Password"
menu.
4.
Input password.
5.
Click "Setting" button to apply password setting
6.
When any client accesses the module, client should send 'password' to server module first,
and then access will be allowed.
ⓥSerial Configuration:
This function is for module configuration not through network with Configuration tool but
through serial communication. When you want to set via serial communication, check
"enable". Please detail about serial configuration refers to "4. Serial Configuration".
Hardwired Internet Connectivity Wizard (WIZnet, Inc.)
23
Advertisement
Table of Contents
