Rear Panel - Inter-m H-3200 Operating Manual

Rear Panel

Rear Panel
1. AC MAINS INPUT
Connect the amplifier to an appropriate AC MAINS power source using the supplied AC MAINS Power
Cord. It is the responsibility of the user to supply/install the appropriate AC MAINS plug, and then to
connect the amplifier to an AC MAINS power source that is rated appropriately for the current required by
the amplifier.
2. OUTPUT CONNECTORS
Binding Posts and Speakon connectors are provided for connection to the cables for the loudspeakers. Please
note that Bridged Mono operation requires a different method of interconnection to the speaker cables than
normal Stereo operation. Also be sure that the amplifier is in the correct mode before connecting the speaker
load.
- STEREO MODE
AMP OUTPUT CH1/CH2
CH1
1- 1+
NEG POS
2+ 2-
CH2
NOT CONNECTED
PROFESSIONAL POWER AMPLIFIER
- BRIDGED MODE
CH1 AMP OUTPUT SPEAKON
1- 1+
MONO(BTL)
2+ 2-
7
H-3200/4200